XW-BV534 Mixed matrix is a three-way BNC, Rd VGA signal input, four-way VGA signal output of a high-bandwidth mixed matrix switchers, the internal high-bandwidth chip, the realization of matrix functions, with arbitrary choice of the output switch, bring the buffer, the output more stable, clear images without ghosting, so to minimize the attenuation of signal transmission to ensure that the image signal to output high-fidelity.
Characteristic
·BNCVGA15HDF input, VGA15HDF output;
·The use of high-bandwidth chip, the realization of matrix functions;
·Choose with the output switch, bring the buffer, the output more stable;
·Clear images without ghosting；
·Attenuation of signal transmission to a minimum to ensure that the image signal to output high-fidelity；
·Embedded intelligent control to provide RS232 control interface;
·Provide RS232 interface allows the use of multi-matrix cascade in order to expand the multi-port;
·With manual panel, infrared remote control, power-down protection at the scene, the state of storage memory.
Technical Data
- Basic
- Bandwidth100Mhz(-3db) Fully loaded
- Light degree of interference-55dB@5Mhz
- Differential Phase0.05o(RL=150Ω)
- Differential gain0.05%(RL=150Ω)
- Maximum delay spread5ns(±1)
- Switching speed≤180ns
- Video
- Signal input-------
- Signal typeVGA-UXGA ; RGBTV
- InterfaceVGA15HDF ; BNC
- Minimum Level0.5Vp-p
- Maximum Level1.0Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- Signal output-------
- Signal typeVGA-UXGA ; RGBTV
- InterfaceVGA15HDF
- Output Level0.7Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- DC compensationMaximum 5mV
- Synchronization-------
- Input / output signal typesTTL
- Input level0V-5.0Vp-p:4.0V
- Output Level5Vp-p
- Input impedance510Ω
- Output impedance75 Ω
- PolarityPositive or negative (and enter exactly the same)
- Control Type
- Serial control interfaceRS-232, 9-pin D-type interface
- Baud rate baud rate and protocol9600
- Data bit8
- Stop bit1, no parity bit
- Serial control port structure2=TX，3=RX，5=GND
- Wireless technologyIR Infrared Remote Control
- Standards
- Power source100VAC ~ 260VAC, 50/60 Hz,
- Power≤20W
