XW-BV534A Mixed Matrix using multi-channel BNC, input VGA15HDF multi-channel, multi-output VGA15HDF Lulu, internal high-bandwidth chip, the realization of matrix functions, with arbitrary choice of the output switch, bring the buffer, the output more stable, clear images without re - shadow, so to minimize the attenuation of signal transmission to ensure that the image signal to output high-fidelity. Embedded intelligent control to provide RS232 control interface and user-friendly with a wide range of remote control device. Provide RS232 interface allows the use of multi-matrix cascade in order to expand the multi-port. At the same time with the manual panel, infrared remote control, power-down protection at the scene, the state of storage memory.
Characteristic
·BNCVGA15HDF input, VGA15HDF output;
·The use of high-bandwidth chip, the realization of matrix functions;
·Choose with the output switch, bring the buffer, the output more stable;
·Clear images without ghosting；
·Attenuation of signal transmission to a minimum to ensure that the image signal to output high-fidelity；
·Embedded intelligent control to provide RS232 control interface;
·Provide RS232 interface allows the use of multi-matrix cascade in order to expand the multi-port;
·With manual panel, infrared remote control, power-down protection at the scene, the state of storage memory.
Technical Data
- Basic
- Bandwidth100Mhz(-3db) Fully loaded
- Light degree of interference-55dB@5Mhz
- Differential Phase0.05o(RL=150Ω)
- Differential gain0.05%(RL=150Ω)
- Maximum delay spread5ns(±1)
- Switching speed≤180ns
- Audio/Video
- Signal input-------
- Signal typeVGA-UXGA ; RGBTV
- Video InterfaceVGA15HDF;BNC
- Audio typeStereo balance
- Audio InterfaceXLR
- Minimum Level0.5Vp-p
- Maximum Level1.0Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- Signal output-------
- Video TypeVGA-UXGA;RGBTV
- Video InterfaceVGA15HDF
- Audio typeStereo balance
- Audio InterfaceXLR
- Output Level0.7Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- DC compensationMaximum 5mV
- 同 步-------
- Input / output signal typesTTL
- Input level0V-5.0Vp-p:4.0V
- Output Level5Vp-p
- Input impedance510Ω
- Output impedance75 Ω
- PolarityPositive or negative (and enter exactly the same)
- Control Type
- Serial control interfaceRS-232, 9-pin D-type interface
- Baud rate baud rate and protocol9600
- Data bit8
- Stop bit1, no parity bit
- Serial control port structure2=TX，3=RX，5=GND
- Wireless technologyIR Infrared Remote Control
- Standards
- Power source100VAC ~ 260VAC, 50/60 Hz,
- Power≤20W
