Model XW-HD0402 is HDMI matrix switchers to connect 4 different HDMI signal input source, 2 different HDMI display device to receive. Users can receive the same time using two display devices to choose a different arbitrary signal input source, the two display devices to choose the same or different output signal. Can be remote-controlled or pre-set input signal source, such as a variety of control sequence, smart choice smart to skip the default signal source turned off in the input port.
Characteristic
·Easily HDMI input signal to switch between the road;
·Two-way mirror shows the HDMI output;
·Support for 480p, 720p, 1080i, 1080p and 1920x1200 resolution;
·Additional digital optical audio output extracted from HDMI input audio signal;
·Easily connected to the multi-channel audio receiver equipment;
·Support high-definition video, high-quality, clear, up to the HDTV resolution of 1080p;
·1920x1200 resolution, the computer can be easily obtained;
·Infrared control (own);
·Fully supports the HDMI1.3;
·Compatible with HDCP;
·Installed quickly, without setting, plug in the power began to work;
Technical Data
- Basic
- Bandwidth1.65GHz（-3Db） full Loaded
- Differential Phase0.05o(RL=150Ω)
- Differential gain0.05%(RL=150Ω)
- Data transfer rate2.25GBits
- Video
- Signal input-------
- Signal typeHDTV
- InterfaceHDMI Interface A-type 19-pin female header
- Minimum Level0.5Vp-p
- The largest level1.0Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- Signal output-------
- Signal typeHDTV
- InterfaceHDMI Interface A-type 19-pin female header
- Output Level0.7Vp-p
- Impedance75Ω
- Return Loss-30db@5MHz
- DC compensationmaximum 5mV
- Control Type
- Serial control interfaceRS-232, 9-pin female D-type interface
- Baud rate baud rate and protocol9600
- Data bit8 bit
- Stop bit1, no parity bit
- Serial control port structure2=TX，3=RX，5=GND
- Wireless technologyIR
- Standards
- Power source100VAC ~ 260VAC, 50/60 Hz, Adaptive Power International
- Power≤20W
- Chassis Size120mm(L)×80mm(W)×20mm(H)
