XUNWEI promotes the VGA matrix switch two generation of matrix products,the new product has four patented technologies to achieve high-bandwidth signal transmission 400Mhz to achieve automatic gain technology off the scene with a VGA matrix switchers protection equipment to automatically save the last clearance state machines; some products allow for the HV signal and RGB signals switching delay, and delay time can be adjusted. VGA matrix switchers using a new type of LED display and touch-panel button to ensure that the state show the more intuitive, more reasonable and more convenient operation of equipment, each model can be with the audio.
Characteristic
·Automatic gain technology to achieve VGA matrix switchers with power protection function at the scene;
·equipment to automatically save the state at the time of the last shutdown;
·some allow for HV and signal delay switch RGB signals;
·adjust the delay time;
·the use of a new type of LED display and touch-panel buttons;
·state show a reasonable intuitive, easier to operate equipment;
·LCD screen display the status of input and output control;
·the scene with a power protection;
·Simple front panel operation, the back plate there is a line and control system can use the RS-232C communication port;
·installation fast and easy to operate.
Technical Data
- Basic
- Bandwidth100Mhz(-3db) Fully loaded
- Light degree of interference-55dB@5Mhz
- Differential Phase0.05o(RL=150)
- Differential gain0.05%(RL=150)
- Maximum delay spread5ns(1)
- Switching speed180ns
- Video
- Signal input-------
- Signal typeVGA-UXGA video signal
- InterfaceVGA15HDF interface
- Minimum Level0.5Vp-p
- Maximum Level1.0Vp-p
- Impedance75
- Return Loss-30db@5MHz
- Signal output-------
- Signal typeVGA-UXGA video signal
- InterfaceVGA15HDF Interface
- Output Level0.7Vp-p
- Impedance75
- Return Loss-30db@5MHz
- DC compensationMaximum 5mV
- Synchronization-------
- Input / output signal typesTTL
- Input level0V-5.0Vp-p:4.0V
- Output Level5Vp-p
- Input impedance 510
- Output impedance75
- Polar positive or negative (and enter exactly the same)
- Control Type
- Serial control interfaceRS-232, 9-pin female D-type interface
- Baud rate baud rate and protocol9600
- Data bit8
- Stop bit1, no parity bit
- Serial control port structure2=TX3=RX5=GND
- Wireless technologyInfrared Remote Control
- Standards
- Power source100VAC ~ 260VAC, 50/60 Hz,International adaptive power
- Power20W
- Chassis Size485mm(L)260mm(W)44mm(H)
