XUNWEI Three-component (YUV) video matrix switchers, BNC interface. Is designed for three-component (YUV) video signals are designed to switch the display of high-performance intelligent matrix switch equipment for the various three-component (YUV) video input signals to switch to the various three-component (YUV) video output channels any one channel, mainly used in radio and television projects, multimedia conference room, large screen display works, television teaching, combined with command and control centers. This product is off the scene with a memory protection switch, infrared remote control functions and control interface with RS232, it will be convenient and personal computers, remote control systems or a variety of remote control equipment
Characteristic
·Automatic gain technology to achieve off-site matrix switchers with protection;
·equipment to automatically save the state at the time of the last shutdown;
·adjust the delay time;
·the use of a new type of LED display and touch-panel buttons;
·state show a reasonable intuitive, easier to operate equipment;
·LCD screen display the status of input and output control;
·Simple front panel operation, the back plate there is a line and control system can use the RS-232C communication port;
·installation fast and easy to operate.
Technical Data
- Basic
- Bandwidth100Mhz(-3db) Fully loaded
- Light degree of interference-55dB@5Mhz
- Differential Phase0.05o(RL=150)
- Differential gain0.05%(RL=150)
- Maximum delay spread5ns(1)
- Switching speed180ns
- Video
- Signal input-------
- Signal typeThree component video
- InterfaceBNC
- Minimum Level0.5Vp-p
- Maximum Level1.0Vp-p
- Impedance75
- Return Loss-30db@5MHz
- Signal output-------
- Signal typeThree component video
- InterfaceBNC
- Output Level0.7Vp-p
- Impedance75
- Return Loss-30db@5MHz
- DC compensationMaximum 5mV
- Synchronization-------
- Input / output signal typesTTL
- Input level0V-5.0Vp-p:4.0V
- Output Level5Vp-p
- Input impedance 510
- Output impedance75
- Polar positive or negative (and enter exactly the same)
- Control Type
- Serial control interfaceRS-232, 9-pin female D-type interface
- Baud rate baud rate and protocol9600
- Data bit8
- Stop bit1, no parity bit
- Serial control port structure2=TX3=RX5=GND
- Wireless technologyInfrared Remote Control
- Standards
- Power source100VAC ~ 260VAC, 50/60 Hz,International adaptive power
- Power20W
- Chassis Size485mm(L)260mm(W)132mm(H)
